MIYO SICAK CORE ISITICI CO., SINIRLI

Ev > Liquid heating resistance

Liquid heating resistance

Immersion heater element Immersion heater element is made of stainless steel pipe with spiral heating wire as heating element.Fully comply with GB/T241993 electrical and electronic products basic environmental test procedures, and gb4706.1-19921 household and similar electrical safety requirements.

Ürün Detayları:

Product description:
water heating tube
Tip: electric water heater accessories
Brand name :SICAK ÇEKİRDEK
Model: TU – 504
Malzeme: SUS304
Tube diameter :8 mm
V: 110-240 V
Watt: 1000-5500K
Fran: 2 “Triclamp (OD64mm)
Şekil: ripple
Use: water heating
Tip: heating element
Sınıf: water heater element

Instructions:
1 The heated liquid does not contain materials that should not be corroded by the components. The scale or carbon deposition on the surface of the tube should be removed frequently during use, otherwise the efficiency and service life of the components will be affected.
2. The operating voltage of the heating element shall not exceed 1.1 times of its rating, the environmental humidity shall not exceed 95%, and the enclosure shall be effectively grounded.
3. The electric heating element of the water heating pipe should be stored in a dry place, because be placed for long if its insulation resistance to earth less than 1 m Ω, can be in around 200 ℃ oven drying resumed after several hours.
4. When the water heating pipe is tightening the thread, don’t push the thread too hard.

Bize yazın

Ürünü İlişkilendir

Daha fazla video

1
Özel Silikon Isıtma Elemanı
sekme terminalleri üreticileri
Borulu ısıtıcı terminali
Özelleştirilmiş Rulman Makaralı Paralel Dübel
termokupl kafa kısmı

HIZLI BAĞLANTILAR

BAĞLAMAK

+86 15521310300
EXPORT@HXHEATER.COM

Telif hakkı © 2024 Mimarlık Bürosu
hxheater tarafından desteklenmektedir

Yukarıya Kaydır

İletişim Formu