บ้าน > Type J Thermocouple Connector

Type J Thermocouple Connector

Type J Thermocouple Connector Type J thermocouple connector Type J Thermocouple consists of two conductors of different materials (usually metal alloys) that produce a voltage in the vicinity of the point where the two conductors are in contact. The voltage produced is dependent on, but not necessarily proportional to, the...

รายละเอียดสินค้า:

Type J Thermocouple consists of two conductors of different materials (usually metal alloys) that produce a voltage in the vicinity of the point where the two conductors are in contact. The voltage produced is dependent on, but not necessarily proportional to, the difference of temperature of the junction to other parts of those conductors. Thermocouples are a widely used type of temperature sensor for measurement and control and can also be used to convert a temperature gradient into electricity.

Classification Type Standard Model Features Temperature Material Use Requirement
Thermocouple S WRP Precious metal 0~1600℃ Pt/Rh 10 Insertion Installation
B WRR 0~1700℃ Pt/Rh 30

R WRQ 0~1600℃ Pt/Rh 13

N WRM Normal 0~1300℃ Ni/Cr High Temperature condiciton
K WRN 0~1300℃ Ni/Si Noraml condition
J WRF 0~600℃ Fe-Cu/Ni Normal temperature
T WRC 0~600℃ Cu-Cu/Ni Normal temperature
E WRE 0~600℃ Ni/Cr-Cu/Ni Normal temperature
Classification Type Standard Model Features Temperature Use Requirement
Resistance PT10 WZP Normal -200~650℃ Stable
PT100 WZP -200~500℃ With Different Range
Cu50 WZC -50~100℃ Temperature range
Cu100 WZC -50~100℃ Temperature range

คุณสมบัติ：
1)Design and produce according IEC international standard.
2)fast thermal response time, whole armored configuration, anti-vibration, long service life.
3)kinds of junction box to select to adapt different spaces.
4)Diameter of thermal resistance is φ3~φ8mm,diameter for thermocouple is φ0.5~φ8mm.
5)Convenient to fix for kinds of configurations and fixing methods.
6)Use to measure temperature in different places.
7)Temperature converted circuit available to convert figure measured to simulated figure like 4~20mA, 1~5A in order to be transmitted in long distance.
l Thermocouple Wires: Cromel-Alumel, Iron- Constant, Copper-Constant, imported Bright & Oxidized finish, SWG 10 ถึง 36. PT/PTRH 10%, 13% .
l Thermocouple Extension & Compensating Cables: Fiber glass covered, PVC / PVC. Asbestos / Asbestosis, Teflon/Teflon, Insulated, Teflon/Fg/SS Braided single pair, multi pair, Type K, J, T, R, and PT-100 RTD Cables 2 core, 3 core, 4 core , 6 core, Also Teflon /silicon rubber Teflon/shielded/Teflon etc qualities.
l Thermocouple M.I. Cables: SS 316, 310 & Inconel 600 quality type K, J, Simplex 1mm,1.5มม, Simplex & Duplex 3mm,6มม, 8มม, also PT-100 RTD Thermocouple M I Cables SS 316 quality. 3มม, 5มม, 6มม 4 core
l Thermocouple Assemblies: Straight, L Type , Rotating type, Inmelt Bolt type, Pencil type, Washer, Holder with Spring. Rotating Type, Adjustable Types etc. Made out of SS tube 4.8mm, 6มม,supplied with Spring & Brass bayonets Single Slot & Double Slot , 10mm id, 12mm id, 14mm id, ฯลฯ.
Application：

Type J Thermocouples (Iron-Constantan) have a smaller temperature range and a shorter lifespan at higher temperatures than the Type K but has the same reliability. Type J thermocouples are ideal for monitoring the temperatures of inert materials and in vacuum applications. Applications include heat processes such as the manufacturing of plastic and resin and in electrical furnaces
· Food processing
· Plastic moulds
· Medical equipment
· Hot stamping
· Liquid immersion
· Packaging equipment
· Labeling & Sealing
· Dies & platens
· Injection molding
· Nuclear industry
· Car industry

Excellent Material
Featured high quality material. Effectively prevent corrosion and rust,compression explosion-proof.
Tube material:SS304/316,incoloy600 ,incoloy 800 (Can be customized)

Thermocouple Extension & Compensating Cables: Fiber glass covered, PVC / PVC. Asbestos / Asbestosis, Teflon/Teflon, Insulated, Teflon/Fg/SS Braided single pair, multi pair, Type K, J, T, R, and PT-100 RTD Cables 2 core, 3 core, 4 core , 6 core, Also Teflon /silicon rubber Teflon/shielded/Teflon etc qualities.

Q1. Can I Have A Sample Order?
A: Yes, we welcome sample order to test and check quality.

Q2. What About The Lead Time?
A: Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity.

Q3. Do You Have Any MOQ Limit?
A: Low MOQ, 1pc for sample checking is available.

Q4. How Do You Ship The Goods And How Long Does It Take To Arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. Is it OK to print my logo?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.