Electric Band Heater
Thanks to excellent heat transfer and uniform heating of the entire surface, the Electric band heater has become a popular and widely used solution. Suitable for heating components in plastic molding, plastic granulators, casting machines, ฯลฯ.
Our Electric band heaters are designed and manufactured according to the highest quality standards to ensure efficient and reliable operation.
Electric band heaters can be customized to specific customer needs.
คุณสมบัติ
1. Excellent heat exchange with the cylinder
2. Heating uniformity
3. อายุการใช้งานที่ยาวนาน
4. ติดตั้งง่าย
5. High mechanical resistance
| Key technical indicators | |
| Conditions of Use: | Ambient temperature -20 ~ + 60 ℃ |
| กระแสรั่วไหล: | <0.5mA |
| Insulation resistance: | ≥ 5M |
| Ground resistance: | <0.1 |
| Voltage resistance: | No electrical breakdown for 1 minute at 1500V |
| Temperature resistance: | 500-800 ℃ |
| การเบี่ยงเบนพลังงาน: | + 5%-10% |
Key technical indicators
Conditions of Use:
Ambient temperature -20 ~ + 60 ℃
กระแสรั่วไหล:
<0.5mA
Insulation resistance:
≥ 5M
Ground resistance:
<0.1
Voltage resistance:
No electrical breakdown for 1 minute at 1500V
Temperature resistance:
500-800 ℃
การเบี่ยงเบนพลังงาน:
+ 5%-10%
Technical specifications
* Specific wattage up to 4W/cm2
* Operating temperature up to 320 ° C
* Internal sheet made of steel treated with high thermal conductivity
* External sheet made of stainless steel AISI 430 resistant to high temperatures
* Resistive band made of Ni-Cr 80/20
* Insulation made of pure mica for high temperatures
* Standard thickness of heater 4 +/- 0.5 มม
* Glass fiber insulated feeder cable with pure nickel or copper-nickel conductor, covered by a metal braid (with built-in ground wire) External protection – operating temperature 320 ° C, peak 350 ° C
Please Specify The Following When Ordering
1. Electric band heater inner diameter (มม) และความยาว (มม)
2. Heater thickness
3. Terminal length (maximum and minimum) and distance of terminal length
4. Cooling tube diameter, length and distance between them.
5. Voltage and power density
6. Gap between two sheets (if applicable)
7. Wiring type and location
8. Whether a blower is required
9. ถ้าจำเป็น, the content of the stamping
10. สั่งซื้อปริมาณ
11. วันที่จัดส่ง
แท็กยอดนิยม: electric band heater, จีน, ผู้ผลิต, ซัพพลายเออร์, โรงงาน, กำหนดเอง, ขายส่ง, ซื้อ, ราคา, micro coil heater, เครื่องทำความร้อนอากาศ, 12 volt water tank heater, ceramic infrared heater elements, tubular heater element, strip heaters
