MIYO HOT CORE HEATER CO., LIMITED

Home > Liquid heating resistance

Liquid heating resistance

Immersion heater element Immersion heater element is made of stainless steel pipe with spiral heating wire as heating element.Fully comply with GB/T241993 electrical and electronic products basic environmental test procedures, and gb4706.1-19921 household and similar electrical safety requirements.

Product Details:

Product description:
water heating tube
Type: electric water heater accessories
Brand name :HOT CORE
Model: TU – 504
Material: SUS304
Tube diameter :8 mm
V: 110-240 V
Watt: 1000-5500W
Fran: 2 “Triclamp (OD64mm)
Shape: ripple
Use: water heating
Type: heating element
Class: water heater element

Instructions:
1 The heated liquid does not contain materials that should not be corroded by the components. The scale or carbon deposition on the surface of the tube should be removed frequently during use, otherwise the efficiency and service life of the components will be affected.
2. The operating voltage of the heating element shall not exceed 1.1 times of its rating, the environmental humidity shall not exceed 95%, and the enclosure shall be effectively grounded.
3. The electric heating element of the water heating pipe should be stored in a dry place, because be placed for long if its insulation resistance to earth less than 1 m Ω, can be in around 200 ℃ oven drying resumed after several hours.
4. When the water heating pipe is tightening the thread, don’t push the thread too hard.

Write to us

Relate Product

More videos

1
Custom Silicone Heating Element
tab terminals manufacturers
Tubular heater terminal
Customized Bearing Roller Parallel Dowel
thermocouple head part

QUICK LINKS

CONNECT

+86 15521310300
EXPORT@HXHEATER.COM

Copyright © 2024 Architecture Firm
Powered by hxheater

Scroll to Top

Contact Form