ミヨホットコアヒーター株式会社, 限定

> Liquid heating resistance

Liquid heating resistance

Immersion heater element Immersion heater element is made of stainless steel pipe with spiral heating wire as heating element.Fully comply with GB/T241993 electrical and electronic products basic environmental test procedures, and gb4706.1-19921 household and similar electrical safety requirements.

製品詳細:

Product description:
water heating tube
タイプ: electric water heater accessories
ブランド名 :ホットコア
Model: TU – 504
材料: SUS304
チューブ径 :8 mm
V: 110-240 V
ワット: 1000-5500W
Fran: 2 “Triclamp (OD64mm)
形: ripple
Use: water heating
タイプ: 発熱体
クラス: water heater element

Instructions:
1 The heated liquid does not contain materials that should not be corroded by the components. The scale or carbon deposition on the surface of the tube should be removed frequently during use, otherwise the efficiency and service life of the components will be affected.
2. The operating voltage of the heating element shall not exceed 1.1 times of its rating, the environmental humidity shall not exceed 95%, and the enclosure shall be effectively grounded.
3. The electric heating element of the water heating pipe should be stored in a dry place, because be placed for long if its insulation resistance to earth less than 1 m Ω, can be in around 200 ℃ oven drying resumed after several hours.
4. When the water heating pipe is tightening the thread, don’t push the thread too hard.

私たちに書いてください

関連製品

他のビデオ

1
カスタムシリコン発熱体
タブ端子メーカー
チューブラーヒーターターミナル
カスタマイズされたベアリングローラー平行ダボ
熱電対ヘッド部

クイックリンク

接続する

+86 15521310300
EXPORT@HXHEATER.COM

著作権© 2024 建築事務所
hxheater によって駆動

一番上までスクロール

お問い合わせフォーム