MIYO CALENTADOR DE NÚCLEO CALIENTE CO., LIMITADO

Hogar > Calentadores eléctricos de tubo radiante

Calentadores eléctricos de tubo radiante

Electric Radiant Tube Heaters Our factory produces the electric radiant tube heaters with a rated operating temperature of 1200 grados. Al mismo tiempo, any specification of the electric radiant tube heaters can be made

Detalles del producto:

Calentadores eléctricos de tubo radiante

Descripción
Parámetros técnicos
advantage:

(1) It can ensure the control of the temperature of the atmosphere in the furnace;

(2) Electric radiant tube heaters have a strong heating capacity and high efficiency;

(3) Save heat-resistant steel.

(4) control de temperatura, installation, and maintenance are more convenient, and it is easy to seal;

(5) Since there is no muffle tank in the furnace, the furnace volume is enlarged and the production capacity is improved;

Características:

1. The electric heating alloy materials used in electric radiant tube heaters should have high resistivity and high electric heat conversion rate. Since the electric radiant tube heaters are placed in the casing, the heat transfer process is different from the general exposed electric heating element. The heat shield is large, and the temperature of the element is controlled during the heating process. Por lo tanto, when selecting materials, it is necessary to analyze the furnace temperature, temperature, and atmosphere in the furnace, and select the correct heating material.

2. It is made of seamless cold-drawn heat-resistant steel pipes made of excellent raw materials. It is suitable for working in high temperature, low oxygen partial pressure and an environment containing S and C.

3. The inner core adopts resistance wire U-shaped axial arrangement end welding method

4. The resistance wire and the ceramic frame are basically unshielded, and the temperature difference between the resistance wire and the furnace is small

parameter:

(1) Basic data required for calculation

(A): Use temperature t (℃)

(B): Heating electric power P (W.)

(do): Component operating voltage U (V)

(D): Length of heating zone L (metro)

(2) According to the basic data, combined with the working conditions of the electric heating element, determine the electric heating used

(3) According to the determined electric heating, refer to the known data and check the attached table to obtain the resistance temperature correction

Etiquetas calientes: electric radiant tube heaters, Porcelana, fabricantes, proveedores, fábrica, costumbre, al por mayor, comprar, precio,

Escríbenos

Relacionar producto

Más vídeos

1
Elemento calefactor de silicona personalizado
fabricantes de terminales de pestaña
Terminal calentador tubular
Pasador paralelo de rodillos de rodamiento personalizado
parte de la cabeza del termopar

ENLACES RÁPIDOS

CONECTAR

+86 15521310300
EXPORTAR@HXHEATER.COM

Derechos de autor © 2024 Estudio de Arquitectura
Desarrollado por hxheater

Desplazarse hacia arriba

Formulario de contacto